Overview Of The Components - Clatronic HR 2603 N Instrucciones De Servicio

Máquina de barbear para homens
Tabla de contenido
WARNING:
This warns you of dangers to your health and indicates possible injury risks.
CAUTION: This refers to possible hazards to the machine or other objects.
NOTE: This highlights tips and information.
WARNING:
The device should be kept dry.
If the device is used in the bathroom, please remove the mains plug after use as the
proximity of water represents a hazard. This also applies if the device is switched off.
Do not use this device near baths, wash basins or other vessels containing water.
Only dry hair should be cut with this
1 Control lamp
2 On/off switch
3 Lock
Please lay the razor on a cool, dry surface when charging.
GB
Insert the jack of the mains cable in the mains socket on the razor and insert the plug in
a duly installed 230V/50Hz socket.
The red control lamp shows that the shaver is being charged and remains on until the
shaver is disconnected from the mains power supply.
NOTE:
The lamp does not provide any indication of the charging status of the battery.
Leave the shaver to charge for at least 8 hours before using for the fi rst time. It takes
from 8 hours for a fl at battery to be charged.
CAUTION: It is not allowed to recharge the battery continuesly more than 8 hours.
38
05-HR 2603 N New.indd 38
05-HR 2603 N New.indd 38
Special Safety Advice for this Machine
machine.

Overview of the Components

4 Release switch
5 Shearing knife
6 Shearing blades
Instructions for charging the device
7 Protective cap
8 Trimmer
9 Unlocking button
09.07.2008 14:08:29 Uhr
09.07.2008 14:08:29 Uhr
Tabla de contenido
loading

Tabla de contenido