Lubricating The Machine - Advance CS7010 Instrucciones De Uso

LUBRICATING THE MACHINE

See Figure 14. Once a month, pump a small amount of grease into each grease fi tting on the machine until grease seeps out around the bearings.
Grease fi tting locations (or apply grease to) (DE):
• Squeegee Caster Wheel Axle and Pivot
• Steering Gears – requires specifi c grease (Nilfi sk PN 56510412) Chevron Open Gear Lube 250 NC.
Once a month, apply light machine oil to lubricate the (DF):
• Squeegee tool end wheels
• Engine Cover Latch (Engine models only)
• Recovery Tank Latch
• Brake Pedal (parking brake) linkage
FIGURE 14
DF
DE
4/2017
DF
INSTRUCTIONS FOR USE
DF
56091206 - CS7010
ENGLISH - A
DF
DE
A - 31