RIESE & MULLER PowerPack 300 Serie Manual Del Operador página 34

Tabla de contenido
EN-32
Code
Cause
450
Internal software error
460
Error at USB port
490
Internal fault of the on-board computer
500
Internal drive unit fault
502
Bike light fault
503
Speed sensor fault
510
Internal sensor fault
511
Internal drive unit fault
530
Battery fault
531
Configuration error
540
Temperature error
550
An impermissible load has been detected. Remove the load. Restart the system. If the problem persists, con-
580
Software version error
591
Authentication error
592
Incompatible component
593
Configuration error
595, 596
Communication error
602
Internal battery fault while charging
602
Internal battery fault
603
Internal battery fault
605
Battery temperature error
605
Battery temperature error while charging Unplug the charger from the battery. Allow the battery to cool. If
Bosch eBike Systems
Corrective measures
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Remove the cable from the USB port of the on-board computer. If
the problem persists, contact your Bosch eBike dealer.
Have the on-board computer checked
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Check the light and the associated wiring. Restart the system. If
the problem persists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Switch off the eBike, remove the eBike battery and reinsert the
eBike battery. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
The eBike is outside of the permissible temperature range. Switch
off the eBike system and allow the drive unit to either cool down or
heat up to the permissible temperature range. Restart the system.
If the problem persists, contact your Bosch eBike dealer.
tact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Switch off the eBike system. Remove then reinsert the battery. Re-
start the system. If the problem persists, contact your Bosch eBike
dealer.
Use a compatible display. If the problem persists, contact your
Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Check the wiring to the transmission and restart the system. If the
problem persists, contact your Bosch eBike dealer.
Unplug the charger from the battery. Restart the eBike system.
Plug the charger into the battery. If the problem persists, contact
your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
The eBike is outside of the permissible temperature range. Switch
off the eBike system and allow the drive unit to either cool down or
heat up to the permissible temperature range. Restart the system.
If the problem persists, contact your Bosch eBike dealer.
the problem persists, contact your Bosch eBike dealer.
English – ​ 7
1 270 020 XBK | (17.05.2018)
Tabla de contenido
loading

Productos relacionados para RIESE & MULLER PowerPack 300 Serie

Tabla de contenido