Tabla de contenido
CONTROL PANEL FUNCTIONS
*Direct selection buttons
Frequently used patterns are available by the direct selection
buttons. Turn on power switch and push a desired button until it
is lit.
*Numerical selection buttons
Use the buttons located at left of number display to select left
digit and the buttons at right to select right digit, referring to the
pattern reference guide located at the bottom of machine.
*Mirror button
MMM
If mirror image is available for selected pattern, push the mirror
button until it is lit.
*Stitch length and width/needle position controls
When a pattern is selected, it will be sewn with recommended
(auto) settings of stitch length and width or needle position for
straight stitch.
Settings of stitch length and width/needle position are indicated
with LED indicator turned on and beep sound, when moving
stitch length and width/needle position controls.
Stitch length and width/needle position can be manually
changed from this position according to your preference.
*Pattern reference guide
Patterns in dark blue – stitch length and width can be changed.
Patterns in pink – stitch length and width are fixed.
Patterns in black – buttonholes and bar-tack patterns
Pattern i
– mirror image is available
34
Mirror button
Touche de miroir
Botón de espejo
Numerical selection button
Touches de sélection numérique
Botones de selección numérica
Number display
Affichage numérique
Exhibición de número
Direct selection button
Touches de sélection directe
Botones de selección directa
LED indicator
Témoin a diode
Indicador LED
Stitch width/
needle position
control
Commande de
largeur de point/
position d'aiguille
Control de ancho
de puntada/
posición de aguja
Stitch length
control
Longueur de point
Control longitud
puntada
Tabla de contenido
