Manufacturer's Declaration - SonoSite 180PLUS Manual Para El Usuario

Caution: To avoid the risk of increased electromagnetic emissions or decreased immunity, use
only accessories and peripherals recommended by SonoSite. Connection of
accessories and peripherals not recommended by SonoSite could result in
malfunctioning of your ultrasound system or other medical electrical devices in the
area. Contact SonoSite or your local representative for a list of accessories and
peripherals available from or recommended by SonoSite.
Electrostatic discharge (ESD), or static shock, is a naturally occurring phenomenon.
ESD is common in conditions of low humidity, which can be caused by heating or air
conditioning. Static shock is a discharge of the electrical energy from a charged
body to a lesser or non-charged body. The degree of discharge can be significant
enough to cause damage to a transducer or an ultrasound system. The following
precautions can help reduce ESD: anti-static spray on carpets, anti-static spray on
linoleum, and anti-static mats.

Manufacturer's Declaration

Table 1 and Table 2
system. For maximum performance, ensure that the system is used in the environments described in
this table.
The system is intended for use in the electromagnetic environment specified below.
Table 1: Manufacturer's Declaration - Electromagnetic Emissions
Emissions Test
RF emissions
ClSPR 11
RF emissions
ClSPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
document the intended use environment and EMC compliance levels of the
Compliance
Group 1
Class A
Class A
Complies
Electromagnetic Environment
The SonoSite ultrasound system uses RF energy only
for its internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
The SonoSite ultrasound system is suitable for use in
all establishments other than domestic and those
directly connected to the public low-voltage power
supply network which supplies buildings used for
domestic purposes.
Chapter 2: Safety 3