Leckey Squiggles Instrucciones De Usuario página 39

Chassis
The Squiggles Seat is designed to fit onto a
range of chassis. This user manual shows the
correct and safe use of the seating system
with the Leckey Hi low and Easy chassis. For
all other chassis or bases please refer to the
manufacturer's handbook.
To prepare the chassis for the seating system
we recommend that you raise the chassis to
a comfortable working height by pressing the
foot lever shown.
Height adjustment –
Hi Low chassis
You can carry out this adjustment with the
child in the chair. To adjust the height of the
Hi low chassis press the foot lever (A) at the
rear of the chassis whilst holding the push
handle (B). Once you remove your foot
from the pedal the seat will be fixed at the
chosen height.
For safety the height adjustment pedal on the
chassis can be locked by engaging the pull
pin (C) on the right hand side of the pedal. To
unlock pull the pin out and rotate 90 degrees,
the pedal can then be operated. The locking
pin (C) should be kept in the locked position
when you are not adjusting the chassis.
Always keep the locking pin engaged
when you are not adjusting the chassis.
This will prevent the foot pedal being
operated accidentially.
A
B
C