Technical Specifications - Facom CL2.BA19 Manual De Instrucciones

EN
Preserving the charger's power supply:
- Do not carry the charger by its power supply cable, and do not pull the cable to remove the mains plug.
- Preserve the cable from heat, hot, cutting or abrasive objects, and chemicals.
- Do not modify the mains plug.
- Inspect the cable and plug before each use.
Protect the batteries and handle them with care:
- Never use faulty or distorted batteries.
- Never expose the batteries to fire.
- Store your machine and your batteries in a location where the temperature is below 40°C.
- Do not open the batteries.
- Fluid can leak from a damaged accumulator: never touch this fluid. In case of contact, perform a long rinse with water; in case
of a contact with the eyes, call a doctor.
- Never touch nor short-circuit the contacts.
- Never place a metallic object close to the contacts: risk of burn or fire.
Never damage the charger:
- Do not insert foreign bodies into the charger's ventilation slots.
- Do not leave the charger connected permanently; it must cool down between 2 charges.
- Observe the temperatures of use of the charger.
- Charge your battery in a dry and ventilated location, the ideal temperature is between 0°C and 45°C.
Technical specifications
Battery
Type
Nominale voltage
Capacity
Weight (battery alone)
It automatically regulates when the accumulator is charged, preventing any damage if the set is left powered on after the
required charging time.
Note: the CL2.CH919 universal charger is compatible with all of FACOM electrically powered tools (CL.P1413D, CL.C1913D).
6
CL2.BA19
LITHIUM-ION
19,2 V
3 Ah
0,77 kg
1 : batterie charge test
2
2 : charge and alarm indicators
1
3 : LED - Light Emitting Diode
4 : LED light switch
3
5 : charger terminals
4
Charger
Charge capacity
Temperature of use
Dimensions (charger only)
Weight (charger alone)
5
CL2.CH1419
14,4 to 19,2 V - 3 Ah
DC
between 0˚C and 45˚C
210 x 111 x 60 mm
0,6 kg
100 - 240 V
AC
50-60 Hz
75 W