Direct Tuning - Teac T-R670 Manual Del Usuario

a
1
2
FM: 100 kHz steps
paliers de 100 kHz
Pasos de 100 kHz
AM: 10 kHz steps
paliers de 10 kHz
Pasos de 10 kHz
Ex.: FM 107.5 MHz
Ex.: AM 1000 kHz
18
Radio Reception (2)
a FM MODE Button
Pressing this button alternates between Stereo mode and
Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the STEREO
indicator lights in the display. If FM broadcasts with weak
signal strength are received, the FM muting function works
automatically to cut the signals, eliminating loud noise.
Mono
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced monaural, reducing
unwanted noise.

Direct Tuning

Using this method, the required frequency is input directly, using
the numeric keys on the remote control unit.
1 Press the DIRECT TUNING button.
The frequency numbers that were displayed should go out.
They will come up again if you don't go on to the next step
within 5 seconds. If this happens, press the DIRECT TUNING
button again.
2 Input the frequency of the broadcast you want to hear
with the numeric keys.
Notes:
< To directly tune to FM frequencies, you need to input two
digits after the decimal point.
< Either in FM or AM mode, if the number you enter in the
rightmost column is wrong and all the preceding numbers are
correct, the tuner tunes to the nearest frequency available.
ENGLISH