Rothenberger ROCAM mobile color Instrucciones De Uso página 17

that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc., in accordance with these
instructions and in the manner intended
for the particular type of power tool,
taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into power tools that have the
switch on invites accidents.
b) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
c) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
d) When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
e) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may
cause irritation or burns.
6) Service
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Special Safety instructions
Safety gloves must be worn at all times.
The inside of the equipment must not be tampered
with in any way! Internal work is the exclusive
domain of trained personnel only (customer
service)!
The TV inspection system is not authorised for use
in medical applications of any kind!
Do not use force to pull the camera and reel cable
out of the tube!
The reel cable is rigid and is therefore under
mechanical stress! Hold it when uncoiling it from
the reel!
The minimum viewing distance must be 50 cm
(average 64 cm) to comply with UVV.
Used removable batteries must not be thrown in
the fire or in the household rubbish. Old batteries
can be taken to your specialist dealer who will
dispose of them in conformity with environmental
regulations.
Do not store batteries with metal objects (danger
of short circuit).
The battery should only be charged in the
ROCAM®; no other charging devices should be
used.
Batteries and chargers should not be opened. They
should only be stored in dry areas and protected
from damp.
Battery fluid may leak from damaged removable
batteries under conditions of extreme load or
extreme temperatures. Any areas that have come
into contact with battery fluid should be washed
immediately with soap and water. If battery fluid
comes into contact with the eyes rinse them
thoroughly for at least 10 minutes and consult a
doctor immediately.
ENGLISH
It is essential to stand beside the
tubecable "axis" to avoid injury!
9