Tabla de contenido
Idiomas disponibles
Idiomas disponibles
I Eco
I Cycle
that
provides
the maximum
water
and
energy
saving
All soil levels
110
150
4.0
_
ossible
to give you optimum
cleaning
by extending
the cycle
(15.0)
tlme
_Adding
options
will
add
time
to the cycle.
See options
information
section.
_This
is the approximate
cycle
time
obtained
with
120°F
(49°C)
hot water
available
at the dishwasher.
Increase
in time
results
from low temperature
of the incoming
water,
Options
TURBOZONE
TM
option
(on some models)
Blasts into every corner to eliminate
the need for soaking and scrubbing of
dirty, baked-on
dishes. For your
toughest items, use the
TURBOZONE
TM
option with the Pots Pans cycle. See
loading
information.
High Temp
Raises the main wash temperature
to
improve
cleaning.
When used with
the Normal
Wash cycle this will
provide
a little extra tough cleaning
capability,
but not as much as the Pots
Pans cycle.
Can be selected
with
SmartWash ®xE
Pots & Pans
Normal
Wash
SmartWash ®xE
Pots & Pans
Normal
Wash
What it does
Directs allof the
cleaning power
of the
dishwasher
to the
TURBOZONE
TM
area
during
certain
times
in
the wash
cycle.
Raises the main wash
temperature
from 105°F
(41°C) to 120°F (49°C).
Added time to cycle
Typical
3O
Max
5O
4O
22
Added
Water t
Gallons
(Liters)
0 - 3.0
11.2)
0 - 3.0
11.2)
Sani Rinse
This high temperature
option sanitizes
your dishes and glassware
in
accordance
with National
Sanitation
Foundation
(NSF)/ANSI
Standard
184
for Residential
Dishwashers.
Certified
residential
dishwashers
are not
intended
for licensed food
establishments.
The Sani indicator
indicates
at the end of the cycle
whether
the Sani Rinse option was
successfully
completed.
If the
indicator
does not activate,
it is
probably
due to the cycle being
interrupted.
Smart Dry
Turns the heat element
on with fan
assist on at the end of the wash cycle.
Use rinse aid with or without
the
Smart Dry option for best drying
results. Plastic items are less likely to
deform
when loaded
in the top dish
rack.
SmartWash ®xE
Pots & Pans
Normal
Wash
Available
with
any cycle
except
Quick Rinse
Increases the main wash
temperature
from 105°F
(41°C) to 120°F (49°C)
and the final rinse from
140°F (60°C)
to 155°F
(68°C).
Turns the heat element
on with fan assist on at
the end of the wash
cycle.
53
73
44
51
tThe maximum
additional
water used for any combination
of options is 2.1 gal. (7.9 L).
0 - 3.0
11.2)
0
17
Tabla de contenido
