Disposal - bluematic SD 43 ORBITAL Manual De Uso Y Mantenimiento

1
4. Uncouple the solution tank tap tie chain (5) in the coupling in the
tap control handle (6) (Fig.4).
5. Remove the water distribution pipe (7) in the hole on the brush
head (8) (Fig.5).
6. Loosen the closing knob (9) (Fig.6) and position the top brackets
more than halfway up the column.
6
5
4
7
To dispose of the appliance, take it to a demolition centre or an
authorised collection centre.
Before scrapping the appliance, it is necessary to remove and
separate out the following materials, then send them to the
appropriate collection centres in accordance with applicable
environmental hygiene regulations:
• Pad holders or brushes
• Electric and electronic parts*
• Plastic parts
• Metallic parts
(*) In particular, contact your distributor when scrapping electric and
electronic parts.
3
1
2
2
7. Remove the solution tank from the control column.
8. Remove the solution tank cap (10) (Fig.7).
9. Rinse the inside with a jet of water, if necessary use a spatula to
remove the sludge that has accumulated at the bottom of the tank.
10. Repeat the operations in reverse order to reassemble all the
parts.
5
10

DISPOSAL

31
4
3
7
9
6
8