Service; Contact In Case Of Malfunction; Warranty - Miele HS18 Instrucciones De Uso

en
If the robot vacuum cleaner is not going
to be used for an extended period of
time, make sure it is stored in a well
ventilated, cool place, but not at an am-
bient temperature below 0 °C or above
60 °C.
For optimum care, store the robot va-
cuum cleaner at half charge capacity
(rechargeable battery status indicator
in the control field is orange).
Standard settings
The robot vacuum cleaner can be reset
to its factory default settings. Have the
remote control to hand.
 Press and hold the Spot and
Turbo sensors in the control field at
the same time for at least 5 seconds.
r:St will appear in the display.
 Within the next 2 seconds, press the
OK button on the remote control until
F:tr appears in the display.
64
The robot vacuum cleaner will start
again with its factory default settings re-
stored.

Service

Contact in case of malfunction

In the event of any faults which you
cannot remedy yourself, please contact
your Miele Dealer or Miele Service.
Contact information for Miele Service
can be found at the end of this docu-
ment.
Please note that telephone calls may be
monitored and recorded for training
purposes and that a call-out charge will
be applied to service visits where the
problem could have been resolved as
described in this booklet.

Warranty

For information on the appliance war-
ranty specific to your country, please
contact Miele. See back cover for ad-
dress.
In the UK, your appliance warranty is
valid for 2 years from the date of pur-
chase. However, you must activate your
cover by calling 0330 160 6640 or re-
gistering online at www.miele.co.uk.