Correct Use - Miele HS18 Instrucciones De Uso

Ocultar thumbs Ver también para HS18:
Tabla de contenido
en - Warning and Safety instructions
Batteries and rechargeable batteries will deplete over time. They
can then leak corrosive fluids. Avoid contact with the eyes and skin.
In the event of contact, rinse thoroughly with water and seek medical
advice.
AUS/NZ: To deal with leaking batteries, refer to the Safety Data
Sheet (contact Miele to request a copy).
The robot vacuum cleaner is fitted with sensors to detect steps
and drops in height. Do not cover these sensors or the camera, and
ensure that the function of the sensors is not hindered by obstacles
whilst the cleaner is moving.
Do not attach any adhesive labels to the front of the base station
as this conceals an infrared transmitter. Do not place any items in
front of it.
Do not immerse the robot vacuum cleaner or the parts supplied in
water. Clean all parts with a dry or slightly damp cloth only.
Do not drop the robot vacuum cleaner or any of the accessories
supplied with it. Items that have been dropped or damaged should
not be used for safety reasons.
AUS/NZ: The robot vacuum cleaner must only be supplied at
safety extra low voltage corresponding to the marking on the appli-
ance.
Miele can only guarantee the safety of the appliance when genu-
ine Miele replacement parts are used. Faulty components must only
be replaced with genuine Miele replacement parts.

Correct use

Do not use the robot vacuum cleaner without the dust box, pre-fil-
ter and exhaust filter fitted.
Remove all breakable or lightweight items from the floor and make
sure that the robot vacuum cleaner cannot become entangled in
cords, curtains, fringes, cables or similar.
42

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Scout rx2 runnerSlql0 10

Tabla de contenido