König Electronic CMP-SP52 Manual De Uso página 3

Connection with 2-Channel Devices (PC/CD/MP3)
1: C onnect the audio device (PC/CD/MP3) to the stereo input jacks on the back panel of the subwoofer with the 3.5mm
stereo cable. (When connecting a CD player to the system, use the front 3.5mm stereo jack).
2: C onnect all satellite speakers to the speaker output section on the back panel of the subwoofer.
3: C onnect the AC power plug and turn on the power switch on top of the subwoofer.
Connection With 5.1-Channel Devices (DVD)
1: C onnect the front channel output of the source (DVD player) to the front channel input sockets on the back of the
subwoofer with a 3.5mm stereo jack.
2: C onnect the rear channel output of the source (DVD player) to the rear channel input sockets on the back of the
subwoofer with a 3.5mm stereo jack.
3: C onnect the subwoofer output of the source (DVD player) to the subwoofer input sockets on the back of the subwoofer
with a 3.5mm stereo jack.
4: C onnect all satellite speakers to the speaker output section on the back panel of the subwoofer.
5: C onnect the AC power and turn on the switch with the switch on top of the subwoofer.
Troubleshooting
• If you experience problems during the installation of your system please first check the following points:
1. Make sure that all cables between the system and source device are carefully and well connected.
2. Make sure that the power supply is switched on.
3. If connected to a non-standard game console or audio device, please consult the manual of those devices.
• Precautions
1. Your system should be situated away from heat sources such as radiators and heaters.
2. Do not place your system on an unstable table, stand, tripod or bracket.
3. Keep your system dry and avoid contact with damp or wet areas.
4. Read the instruction manual carefully before installing your system.
5. Keep this instruction manual for future reference.
Connect to PC, CD, MP3
Connect to DVD
3