Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
- When the pneumatic tool is not used, store it out of the reach of children. Do not allow persons unfamiliar with these instructions
to operate the tool.
- Check that the pneumatic tool is in good condition: make sure that no parts have been damaged.
- Make sure that no other people are near the tool.
- Only use products suitable for the required job:
• Environmentally-friendly detergents for cleaning car carpeting or interiors.
- Do not modify the pneumatic tool. This can reduce the effectiveness of safety measures and increase operator risk.
- Have the pneumatic tool repaired only through a trained repair person. Use original replacement parts.
- Clean the pneumatic tool by rinsing the nozzle with clean water after each use.
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR
PERFORMING MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE
OPERATING PNEUMATIC TOOL
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS ACCORDING TO THE
VALUES FOUND IN THE ENVIRONMENTAL/INDUSTRIAL HYGIENE SURVEY
TECHNICAL DATA
TANK
LENGTH
HEIGHT
AIR INLET
OPERATING PRESSURE
INTERNAL HOSE SIZE (Ø)
MEAN AIR CONSUMPTION
EXTRACTOR COUPLING Ø
EXTRACTION PIPE LENGTH
WEIGHT
6
1000 ml
350 mm
260 mm
1/4" GAS
6.2 bars
8 mm
110 l/min
30 mm
2 m
0.885 kg
EN
I
Tabla de contenido
