Operation - Haier HCW3260AES Manual Del Usuario

BAKING PROBLEM
Cakes high in middle with crack
on top
Piecrust edges too brown

OPERATION

PROBLEM
F03 or F04 Error
appears in the
display window.
Other F_ Error
appears in the
display window.
The oven
display does not
illuminate.
Cooling fan
continues to
run after oven is
turned off.
Oven door is
locked and will
not release, even
after cooling.
Oven is not
heating.
Oven is not
cooking evenly
40
CAUSE
•
Oven temperature too high
•
Baking time too long
•
Pans touching each other or oven walls
•
Incorrect rack position
•
Pan size too small
•
Oven temperature too high
•
Edges of crust too thin
POSSIBLE CAUSE
A problem with
latch mechanism
occurred.
The oven
components
have not cooled
sufficiently.
No power going to
the oven.
Oven Mode or
Temperature not
selected.
Oven rack is not in
correct position.
Convection Bake
Mode
SOLUTION
Turn off power at the main power supply
(fuse or breaker box), wait a few seconds
and turn it back on again. The oven
should run a latch auto–test. If condition
persists, note the code number and call
an authorized service center.
Turn off power at the main power supply
(fuse or breaker box), wait a few seconds
and turn it back on again. If condition
persists, note the code number and call
an authorized service center.
Turn off power at the main power supply
(fuse or breaker box). Turn breaker
back on. If condition persists, call an
authorized service center.
The fan turns off automatically when
the electronic components have cooled
sufficiently.
Turn the oven off at the circuit breaker
and wait a few seconds. Turn breaker
back on. The oven should reset itself
and will be operable.
Turn on power at the main power supply
(fuse or circuit breaker box). If condition
persists, call a qualified electrician.
Turn control knobs to select the oven
mode and temperature.
Refer to cook charts for recommended
rack position.
Always reduce recipe temperature
by 25°F (15 °C) when baking with
Convention Bake mode.