Haier HCW3260AES Manual Del Usuario página 16

TEMPERATURE PROBE
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to do so can result in burns.
The temperature probe monitors the internal food temperature, which is frequently
used as an indicator of doneness especially for meats and poultry, and turns off the
oven when the internal food temperature reaches the programmed temperature.
The temperature probe will work with all oven modes except for the Warm/Proof,
Sabbath and Self-Clean modes.
IMPORTANT: Always unplug and remove the temperature probe from the oven
when removing the food.
To Use the Temperature Probe:
1. Insert the probe into the food.
NOTE: For meats, the probe tip should be inserted into the center of the
thickest part of the meat. Make sure that the probe tip is not into the fat or
touching bone.
2. Place the food into the oven. Keeping the temperature probe as far away from a
heat source as possible, plug the temperature probe into the oven outlet. Close
the oven door.
3. Select the oven mode.
4. Enter the oven temperature by pressing the numbers on the keypad.
5. Press START. The set oven temperature will appear on the display throughout
cooking.
6. Enter the desired internal food temperature by pressing the numbers on the
keypad, and then press START.
NOTES:
•
The internal food temperature can be set between 110°F and 200°F (43°C
and 93°C).
•
When the set probe temperature is reached, the oven will turn off.
7. Press CANCEL when finished. Unplug the temperature probe and remove food
from the oven.
NOTE: The probe icon will remain lit in the display until the probe is unplugged.
14
WARNING
Burn Hazard