Slide Switch Features - Victor 1530-6 Manual De Instrucciones

SLIDE SWITCH FEATURES

This section illustrates and describes the mode switches you can use to control your
calculator's operation.
1.  5/4 

5/4

2.  PRINT

(Non-print)
PRINT
3. + 0 1 2 3 4 6 F
+
0,1,2,3,4,6
F
Decimal Rounding Selector
This causes automatic round down (truncation).
This setting causes automatic round off. If the last digit of the result that
will be printed or printed/displayed upon rounding is followed by a value
of 0 to 4, the digit is unchanged. If the last digit of the result that will be
printed or printed/displayed upon rounding is followed by a value of 5 to
9, the digit is rounded up.
This setting causes automatic round up
Printer Select Switch
Printer is activated only when feed key or non-add/date key is
pressed.
Printer is activated as long as calculator is turned on.
Decimal Point Selector
Monetary Add Mode: At this setting, amounts entered are assumed to
be monetary. The calculator automatically supplies a decimal point to
the left of the last two digits entered. Use this setting to add, subtract,
multiply and divide decimals.
Units/price mode operation:
Multiplication: The first factor will be entered as a whole number and
the second factor will have a decimal point supplied to the left of the
last two digits.
Division: The first factor will have a decimal point supplied to the left of
the last two digits and the second factor will be entered as a whole
number.
Fixed decimal point mode; these settings specify the number of digits
to the right of the decimal point that are shown in the result.
Floating decimal point mode; this setting specifies that all digits of the
result are shown, up to a maximum of 10 on model 1530-6, and 12 on
model 1560-6 and 14 on model 1570-6. If the result exceeds these
capacities, excess digits to the right of the decimal point are dropped.
No rounding takes place.
- 8 -