HIKOKI UV 3628DA Instrucciones De Manejo página 10

English
SELECTING ACCESSORIES
The accessories of this machine are listed on page 240.
SPECIFICATIONS
1. Power tool
Model
Voltage
Vibration frequencies
Vibrating rod
(Body) Dimensions
Length x Height x Width
Battery available for this tool*
Weight**
* Existing batteries (BSL3660/3620/3626, BSL18xx series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery
Model
Voltage 36 V / 18 V (Automatic Switching*)
2.5 Ah / 5.0 Ah
Battery capacity
Available cordless
products**
Available charger
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
3. Charger
Model
Charging voltage
Weight
BSL36A18 BSL36B18
4.0 Ah / 8.0 Ah
(Automatic Switching*)
Multi volt series, 18 V product
Sliding charger for lithium ion
batteries
UC18YSL3
14.4 V – 18 V
0.6 kg
APPLICATIONS
○ Compaction when casting concrete for foundations or
concrete products
UV3628DA
12000 min {times/min} (in normal mode)
–1
15200 min {times/min} (in power mode)
–1
Diameter: 28 mm, Length: 187 mm, Assembly: 825 mm
1045 x 224 x 109 mm
Multi volt battery
4.2 kg (BSL36B18)
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 3 (on page 2).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1)
10
36 V