Heathrow Scientific Sprout Manual De Instrucciones página 8

7. Do not force tubes into the rotor. Use adapters and
correctly sized rotors for your application.
8. Close lid securely. A properly closed lid will grasp the front
silicon tab keeping the lid closed. If a clicking sound is heard while
the unit is operating, the lid is not fully closed. Do not attempt to
operate with the lid removed or open.
Turn power switch ON. Unit will not operate with lid open.
If there is a smooth whirring sound and the unit accelerates with little
or no vibration, Sprout
sounds, or excessive vibration, DO NOT OPERATE. Contact the
Heathrow Scientific
9. To stop centrifugation, press power switch and wait until the rotor has
completely stopped rotating before opening the lid.
Warning!
Do not open lid until rotor has completely stopped! Avoid severe
personal injury or property damage from moving parts.
Rotor Replacement
To remove SnapSpin
-Press center button firmly
and at the same time lift rotor
upwards.
To install SnapSpin
-Set rotor onto the hex shaft.
Press center button firmly and
downward. Rotor should latch
with a click sound.
Warning!
Do not use damaged or cracked rotors!
8
SnapSpin
® is ready to use. If there are loud or unusual
® LLC Technical Support.
rotor:
™
rotor:
™
Strip Tube
™