Dwdm Measure Function; Measurement Parameters - Promax PROLITE-60 Manual Del Usario

5.3.2 DWDM MEASURE function

Measurement parameters

For each WDM (Wavelength Division Multiplexing) carrier:
λ
Corresponds to the wavelength where is located (nm).
PWR Power level (dBm).
SNR Measurement of the optical signal-noise ratio (SNR).
For all carriers:
Min. Carrier number with a minimum measured level.
Max. Carrier number with a maximum measured level.
Tilt Calculation of the slope between carriers detected and according to
the linear quadratic minimum function. (dB/nm)
Peak to peak Peak to peak deviation, defined as difference between maximum and
minimum carrier power (dB).
SETUP Menu Access to measurement parameters configuration menu.
Page 26
Figure 15.- WDM source measurements
USER'S MANUAL. PROLITE-60
09/2007