Fan Speed Control - Honeywell HQ09 Serie Manual Del Propietário

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
• Sleep Mode
When the Sleep Mode is activated in Air Conditioning mode, the set temperature will increase by 1°F
or 1°C after the first hour of cooling and will increase a further 1°F or 1°C after the second hour of
cooling. The unit will maintain this temperature for 5 hours. The set temperature will then reduce by
1°F or 1°C on the seventh hour and reduce a further 1°F or 1°C on the tenth hour. Sleep mode will then
deactivate automatically.
In Heating Mode*, the set temperature will reduce by 2°F or 2°C after the first hour of heating* and will
reduce a further 2°F or 2°C after the second hour of heating*. The unit maintains heating* at this
temperature for 5 hours. Then, the set temperature will increase 2°F or 2°C at the seventh hour and will
increase a further 2°F or 2°C on the tenth hour. Sleep mode will then deactivate automatically.
Note: The Sleep Mode can be deactivated during cooling or heating* mode by pressing any button at
any time.
MODE CONTROL
Settings: COOL, DRY, FAN and HEAT*.
The corresponding indicator light will illuminate to indicate the current mode setting.
• Air Conditioning Mode (COOL)
Adjust fan speed and air temperature to suit your desired comfort level.
Temperature setting range is 16°C - 32°C (60°F - 90°F).
• Dehumidifying Mode (DRY)
Fan speed is preset to LOW.
Note: If the unit will be used mainly as a dehumidifier, do not connect the exhaust hose. Continuous
drainage is then necessary (refer to Continuous Draining for Dehumidifier Mode).
• Fan Mode
For air circulation without Honeywell Portable Local Air Conditioner cooling.
• Heating Mode* (HEAT)
In this mode, the desired temperature can be set between 16°C - 32°C (60°F - 90°F). When in heating
mode condensation must be drained from the lower drain plug.
Note: The exhaust hoses must vent outside the room when using heating mode.

FAN SPEED CONTROL

3 settings: High, Medium and Low.
EN 7
*Applicable for models with Heating feature only.