BOMANN EWB 1027 CB Manual De Instrucciones página 39

NOTE:
• For hygienic reasons exchange the water in
the tank after 24 hours.
• To avoid fungi and bacteria leave the lid
open after use.
Ice cube container
Remove the ice cube container and clean it with
a mild detergent under running warm water.
Casing and Interior
• Clean casing and interior with a damp cloth
• Use a diluted solution of vinegar and water
Drain Residual water
Drain the residual water if the appliance is not in
use for a longer period of time.
Problem
WORK indicator light is
not illuminating.
ICE FULL indicator
light is illuminating.
ADD WATER indicator
light is illuminating.
ICE FULL and ADD
WATER indicator lights
are both illuminating.
Ice making performance
is not good. Abnormal
noise.
Troubleshooting
Possible Cause
Power Source is not switched on.
1. Ice fullness.
2. Low-temperature protection
(temperature is lower than 5ºC).
Water Shortage
1. Ice Making box is inserted
in wrong position.
1. Heat elimination is bad.
2. Water temperature is too high.
3. Ambient temperature is too high.
4. Refrigerant leaks.
Fan or pump is damaged.
Rest the appliance on a table edge. Hold a bowl
under residual water drain valve.
• Turn the residual water drain valve anti-clock-
wise to drain off the rest of water.
• Close the residual water drain valve after the
residual water has been drained.
Storage
• We recommend that you keep the appliance
in the original packing if you do not intend
using it for long periods.
• Always keep the appliance out of the reach of
children in a dry, well-ventilated place.
Solution
1. Check the power supply matches
2. Check the power cord is connected
correctly
3. Internal components are damaged.
Maintenance in professional
department.
1. Remove the full Ice cube.
2. Move the Ice maker to a warmer
place, where the ambient
temperature is higher than 5ºC.
1. Add drinking water into Ice maker,
and press
2. Water supply system is damaged.
Maintenance in professional
department.
1. Check whether any foreign body
stuck the Ice making box.
2. Internal components are damaged.
Maintenance in professional
department.
1. Clean the dust on the cooling fan
and air inlet/outlet part.
2. Fill normal temperature water.
3. Do not place the appliance in high
temperature conditions.
4. Refrigerating system is damaged.
Maintenance in professional
department.
Button.
39