Specifications - Monacor JTS RU-G3TH Manual De Instrucciones

4 If you do not only want to set the microphone
to the group and the channel or transmis-
sion frequency but also want to change the
microphone sensitivity or the transmission
power, for example, change the Remoset
Configuration on the receiver from RC FRE
to RC ALL (see instruction manual of the
receiver RU-901G3 / 5)
To transfer settings from the receiver to the
microphone: Press the button REMOSET on the
receiver As soon as the settings on the micro-
phone have been made, the LED (2) will light
up in blue for approx 5 seconds
If the LED only flashes a few times, auto-
matic synchronization of the microphone has
failed For troubleshooting, see items 1 – 3 at the
beginning of this chapter Then press the button
REMOSET on the receiver again
14

5 Specifications

Type of microphone:
Polar pattern:
Carrier frequency range: 506 – 542 MHz
Transmission power (EIRP)
Low:
High:
REMOSET transmission: ultrasonic
Audio frequency range: 50 – 18 000 Hz
Max SPL:
Ambient temperature:
Power supply:
Dimensions
(W × H × D):
Weight:
Subject to technical modification
hand-held micro-
phone with con-
denser cartridge
cardiod
10 mW
50 mW
140 dB
0 – 40 °C
2 (rech ) batteries of
size AA
⌀ 50 mm × 253 mm
780 g