Dmz - Multilaser RE027 Manual Del Usuario

To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disabled All button to make all entries enabled/disabled
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the previous page.
Note:
1. When the trigger connection is released, the corresponding opening ports will be closed.
2. Each rule is allowed to be used only by one host on LAN synchronously. The trigger connection of other hosts on LAN will
be refused.
3. Incoming Port Range cannot overlap each other.

4.8.2. DMZ

162
Choose menu "Forwarding > DMZ", you can view and configure DMZ host in the screen as shown in Figure 4 36. The DMZ host feature
allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing. DMZ host
forwards all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client function disabled and should
have a new static IP Address assigned to it because its IP Address may be changed when using the DHCP function.
To assign a computer or server to be a DMZ server:
1. Check the Enable radio button
2. Enter the IP Address of a local host in the DMZ Host IP Address field
3. Click the Save button.
Figure 4-36 DMZ
www.multilaser.com.br