Dhcp; Dhcp Settings - Multilaser RE027 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

www.multilaser.com.br

4.7. DHCP

There are three submenus under the DHCP menu (shown in Figure 4 26), DHCP Settings, DHCP Clients List and Address Reservation.
Click any of them, and you will be able to configure the corresponding function.
4.7. DHCP Settings
Choose menu "DHCP > DHCP Settings", you can configure the DHCP Server on the page as shown in Figure 4-27. The Router is set
up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Router on the LAN.
DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within
your network or else you must configure the computer manually.
Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.1.100
is the default start address.
End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.1.199 is
the default end address.
 
Figura 4-26 O menu DHCP
Figure 4-27 DHCP Settings
155
 
Tabla de contenido
loading

Tabla de contenido