Tabla de contenido
Idiomas disponibles
Idiomas disponibles
www.multilaser.com.br
Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
METHOD TWO: ENTER THE PIN FROM MY ROUTER
Step 1: Get the Current PIN code of the Router in Figure 4 3 (each Router has its unique PIN code. Here takes
the PIN code 12345670 of this Router for example).
Step 2: For the configuration of the wireless adapter, please choose "Enter a PIN from my access point" in the
configuration utility of the WPS as below, and enter the PIN code of the Router into the field after "Access Point PIN".
Then click Next.
Note:
The default PIN code of the Router can be found in its label or the WPS configuration screen as Figure 4-3.
c) You will see the following screen when the new device successfully connected to the network.
Note:
a.
The WPS LED on the Router will light green for five minutes if the device has been successfully added to the network.
b.
The WPS function cannot be configured if the Wireless Function of the Router is disabled. Please make sure the Wireless Function is
enabled before configuring the WPS.
The WPS Configuration Screen of Wireless Adapter
133
Tabla de contenido
