Initial Use; Switching Off - Ortovox ZOOM+ Instrucciones De Uso

ZOOM+

INITIAL USE

SWITCHING ON
Turn the ON/OFF switch (1) clockwise.
The rotary switch clicks into the position
"ON" and is now secured against being
unintentionally switched off.

SWITCHING OFF

Press in the ON-OFF switch (1) to unlock
it then turn it counter-clockwise to the
"OFF" position.
SELF-TEST, TRANSMISSION MODE
After switching on the ZOOM+,
the 10-digit serial number appears.
The automatic self-test begins
with the display check.
The transmitter, receiver, smart antenna,
and sensors are then tested.
The remaining battery capacity is also
displayed as a percentage (e.g. "99").
For further information about the battery, see p. 42
The installed software version then follows (e.g. "2.0")
32 EN
INSTRUCTIONS
(device in transmission mode)
1
1