Care And Maintenance - Beurer BC 57 Manual De Instrucciones

Step 4: BC 57:
Data transfer immediately
after measurements.
• If Bluetooth data transfer
®
has been activated,
data is transferred after
having confirmed the user
memory and pressing the
START/STOP button
The 'beurer HealthCoach' app must be active
to allow data transfer.
If your smartphone has a protective cover, remove
this to ensure that there is no interference during
the transfer.
We would explicitly draw attention to the fact that
the software to hand is not a medical product in
accordance with EU Directive 93/42/EEC.
Step 4: BC 57:
Data transfer at a
later point:
• Go to memory
mode (chapter
10). Select the
desired user
memory. The
Bluetooth
. ®
transfer starts
automatically.
The values displayed are purely for visualisation
purposes and must not be used as a basis for
therapeutic treatments. The software is not part of
a diagnostic-medical system.

11. Care and Maintenance

• It is recommended to disinfect the cuff 2 times
every week if needed. Wipe the inner side (the
side touching the skin) of the cuff with a soft
cloth, squeezed after moistened with Ethyl alco-
hol (75-90%), then dry the cuff by airing.
• Cleaning of the cuff after the usage of every 200
times is recommended.
• Clean the device and cuff with a slightly moist-
ened cloth.
• Do not use detergents or solvents.
• Never immerse the device in water or other
liquids.
• When storing the device, make sure no heavy
objects are placed on top of it.
27