Identifying The Parts (Main Unit) - Teac AD-850 Manual Del Usuario

32 31
1
Display
This shows the total number of tracks/files, playback time and
other information (page 14) .
2
Remote sensor
When operating the remote control, point it towards here .
3
OPEN/CLOSE (L) button
Press this button to open and close the disc tray .
4
COUNTER RESET button
Press this button to reset the tape counter to "0000" .
5
REC LEVEL knob
Turn this knob to adjust the recording level .
6
Skip (.//)/Search (m/,) buttons
Press these buttons to skip through tracks/files .
Hold down these buttons to search for part of a track/file .
7
REPEAT button
Use this button to set the repeat function (page 20) .
8
SOURCE button
Use this button to select the source (page 17) .
9
Stop (H) button
Press this button to stop cassette tape playback .
Press this button to stop recording to a tape .
12

Identifying the parts (main unit)

1
30 29 28 27
2 3 4 5 6
26 25 24 23 22 21
10
RECORD USB button
Use to record to an external USB flash drive . Press it once to
enable recording standby, and press it again to start recording
(page 28) .
Press it during recording to divide the file at that point (page
30) .
11
RECORD TAPE button
Use to record to a tape . Press it once to enable recording standby,
and press it again to start recording (page 31) .
12
Fast-forward/Rewind (m/,) buttons
Press these buttons to fast-forward/rewind the cassette tape .
13
Pause (J) button
Press this button to pause cassette tape playback or recording .
Press this button again to resume playback or recording .
14
Cassette tape compartment
15
MIC connector and mic LEVEL knob
When using a mic to record, insert the mic cable plug into this
connector and turn the knob to a suitable level (page 34) .
This unit does not support stereo mics.
Use a mono dynamic mic.
Set the MIC LEVEL knob to MIN when not using a mic.
8 10 11
7 9 12 13
20 19 18 17