Servicing And Maintenance - silicomp METALLA PRO Manual De Instrucciones

SERVICING AND MAINTENANCE

4.1 SERVICING AND MAINTENANCE
METALLA PRO was designed in compliance with maximum reliability and solidity criteria. The
instrument does not require any special maintenance.
Do not keep the system in places which are too hot ( above +60°C) or too cold ( below -20°C).
Do not use the system in places which are too hot (above +50°C) or too cold (below -5°C).
Prevent the system from strong and sudden variations in temperature and humidity.
Do not force the instrument controls or the instrument itself (antenna joint etc. )
Do not touch the contact spring inside the battery compartment.
Do not use organic solvents, diluents or petrol when cleaning the instrument.
Protect the instrument against falls and shocks.
Do not wet the instrument and protect it against rain.
Protect the instrument from dust and sand.
Do not attempt to open the instrument.
In case the instrument needs any repairs, please request the information technical data sheet, fill it
in, attach it to the instrument and send everything to:
METALLA PRO
SILICOMP S.p.A.
Via Grazia Deledda 10/a/b/c
20090 Opera - Milano
Tel. +39 02 530009.1 r.a. - Fax +39 02 57606322
Internet::
e-mail: [email protected]
www.silicomp.it
31
ENGLISH
Chap. 4