Safety Instructions; Setting Up The Basic Functions - schmalz VS-V/P-W-D K 3C-D Manual De Instrucciones

6 Operation
6.1 Safety Instructions
NOTE
Operating pressure above the recommended maximum pressure
Damage to the switch
4 Only use the Vacuum/pressure switch within the nominal pressure range.
Do not drop the vacuum switch or subject it to impacts.
Even if the housing is undamaged, internal components may be damaged and cause malfunction.
6.2 Setting Up the Basic Functions
The Vacuum/pressure switch is operated using three buttons:
SET BUTTON
UP BUTTON
DOWN BUTTON
Settings are configured in software menus.
The following menus are available:
• Main menu: For standard applications
• Additional Functions menu: For applications with special requirements
Activating the Main Menu and Selecting Parameters
ü The Vacuum/pressure switch is in Measurement mode.
1. Press the button for at least three seconds.
ð The first parameter in the main menu is selected. This is indicated by ot1 in the lower dis-
play.
EN-US · 30.30.01.02016 · 01 · 11/19 13 / 40