Design Of Vacuum/Pressure Switch; Pneumatically Connecting The Switch - schmalz VS-V/P-W-D K 3C-D Manual De Instrucciones

3 Design of vacuum/pressure switch
1 UP BUTTON
2 Display
3 DOWN BUTTON
4 SET BUTTON
5 Electrical connection/con-
nection cable
6 Measuring medium
7 O-ring
8 Mounting thread 2xM5
4 Pneumatically Connecting the Switch
4 The pneumatic connection uses a G1 or G2
thread. Connect suitable pipelines with the appro-
priate connection. To connect the hex socket or
connector, hold the hexagonal part of the pneu-
matic connector tight and secure it. Use a tighten-
ing torque of 13 Nm or less.
10 / 40
2
1
4
3
8 7
EN-US · 30.30.01.02016 · 01 · 11/19
5
6