Safety Precautions - VESTEL AC22 Serie Guia De Instalacion

SAFETY PRECAUTIONS

Warnings
1) WARNING: Danger of electrical shock or injury. Turn OFF power at AC mains side or
load center before connecting the electrical supply of the EV charger.
2) On AC mains side of the Vestel EV charger, below Circuit Breaker, Ground Fault Circuit
Protector and AC mains cable combinations must be used according to the models.
3) EV charger AC mains supply connection and load planning must be analyzed and
approved by authorized personnel in accordance with all applicable local and national electrical codes and
standards. For multiple EV charger installations, the load planning must be evaluated accordingly. The
manufacturer is not responsible or liable, directly or indirectly, in any way for any damage and risks caused
by the incorrect AC mains supply and load planning.
AC22 Series
Built-in Residual Current Sensing module
Electrical Infrastructure Requirement
Required Circuit Breaker on AC Mains
Required Ground Fault Protector on AC Mains
Required AC Mains Cable
Vehicle charge cable
AC11 Series
Built-in Residual Current Sensing module
Electrical Infrastructure Requirement
Required Circuit Breaker on AC Mains
Required Ground Fault Protector on AC Mains
Required AC Mains Cable
Vehicle charge cable
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION :
VESTEL EV CHARGER MUST BE INSTALLED ONLY
BY A LICENSED AND EXPERIENCED ELECTRICIAN IN
ACCORDANCE WITH ALL APPLICABLE LOCAL AND
NATIONAL ELECTRICAL CODES AND STANDARDS.
English - 1 -
DC 6mA
400VAC 50/60 Hz - 3-phase 32A
4P-40A MCB Type-C
40A - 30mA RCCB Type-A
5 x 6mm² (< 50m)
Outer Dimension: Ø 15-21 mm
Type 2 socket compatible on charging station side
DC 6mA
400VAC 50/60 Hz - 3-phase 16A
4P-20A MCB Type-C
20A - 30mA RCCB Type-A
5 x 4mm² (< 50m)
Outer Dimension: Ø 15-21 mm
Type 2 socket compatible on charging station side