Instructions For Ordering Spare Parts; Transport And Storage; Guarantee - Technoflex GOLD Manual De Instrucciones/Lista De Recambios

1B
OPERATION
B) To loosen the cable attaching, to cut the two power suply cables L and N, the two of output L'
and N' to the height right connector, the two ground drivers and the three cables of the motor
U, V, W to the height of the connection terminal.
C) To rivet all the terminals of the new equipment perfectly and to close the box correctly.
The parts which are seen to have excessive wearing, the loose bearings, heat up or make too much
noise, must be substituted and always remember ORIGINAL SPARE PARTS MUST BE USED.
For safety reasons and so as to avoid accidental starting, DO NOT forget to disconnect the
Vibrator from the network, when some kind of operation or part substitution is made.
1.9

Instructions for Ordering Spare Parts

Spare parts are on sale thrugh the official services and in the brand distributors in your locality.
When you order spares do not forget to indicate:
Type of machine
-
Units ordered, code and description of parts requested , and whenever possible, the series
-
number of the machines
When equipment or spare parts have to be returned to the factory its necessary to contact with
-
Industrias Technoflex S.A. for prior agreement, "AN ABSOLUTE NECESSITY FOR THEIR
RECEPTION".
1.10

Transport and Storage

•
Conditions for transport and storage:
The packaging of the GOLD- Vibrator allows its easy transport without taking any special precaution.
Its storage the GOLD- Vibrator if it is for a long period of time, its storage will be in a safe dry place
and it is convenient to do it in a way that the flexible transmission is in an extended position, with the
aim that permanenet deformations in the neoprene covering.
Before storage and after use the transmissions must be perfectly cleaned outside, taking all the
concrete leftovers off, this operation can be carried out by hydro jet avoiding the electric parts.
1.11

Guarantee

A) Period of Guarantee
Industrias Technoflex S.A., guarantees the products and components they manufacture, for a
period of 6 months.
B) Coverage of Guarantee
The guarantee covers all the defects from manufacturing of the components of the product, as well
as their replacement or substitution, on behalf of the Technical After Sales Service.
C) Cancellation of Guarantee
The guarantee does not cover the misuse or inadequate manipulation, on behalf of the use of the
vibrator, nor the incorrect connection, knocks, maltreatment or repairing by unauthorised personnel.
The EDF- type HIGH FREQUENCY ELECTRONIC VIBRATORS can only be conected to single-
phase current of 200/240V., or 110/120 V., and 50/60Hz. according to country.
1B-8 ENGLISH