Instruction manual
PARTS DESCRIPTION
1. Lid
2. On/Off switch
3. Handle
4. Power indication light
5. Base
6. Button to open lid
HOW TO USE
First use
•
Take the appliance and accessories out of the box. Remove the stickers,
protective foil or plastic from the device.
•
Check if the voltage of the appliance corresponds to the main voltage
of your home. Rated voltage : AC220-240V 50Hz.
•
Before the first use boil a full kettle of water to clean the kettle and
discard this water.
Use
•
Always remove the kettle from the base (No. 4) when filling it, this to
avoid water dripping into the base.
•
Make sure the water level will never exceed the maximum level marker.
•
If not enough water is used, the kettle will switch off, with too much water
it may boil over. Switch the device on by pressing at the on/off switch (No.
2). The indicator light (No. 5) will be illuminated. Once the water has boiled,
the on/off switch returns automatically to the off position.
•
If the appliance is accidentally switched on when empty, the boil-dry
protection will automatically switch it off. Adding cool water will cool
the boil-dry protection mechanism which enables you to use the kettle
as normal.
4
6
5
4
CLEANING OF THE DEVICE
1
2
•
Remove the plug from the outlet and allow the unit to cool down
completely before cleaning.
3
•
The outside of the kettle can be wiped off down with a damp cloth.
Never use metal polish.
•
The base should always be cleaned without water.
•
Never immerse the kettle and base in water or any other liquids.
•
The device should be regularly decalcified. Use a descaling product
which is suitable for household appliances.
•
Rinse the kettle several times with clean water after descaling.
GUARANTEE
•
This appliances is covered with a 24 month guarantee starting on the
date of purchase (receipt).
•
Damage caused by not following the instruction manual, will lead to
a void of warranty, if this results in consequential damages Tristar will
not be liable.
•
Tristar will not be liable for material damage or personal injury caused
by improper use or if the safety instructions are not properly executed.
•
Cleaning, as mentioned in this manual, is the only maintenance that is
necessary for this appliance.
•
When the application should be repaired, make sure that this will be
performed by an authorized company.
•
This appliance may not be amended or changed.
•
If problems arise during the 12 months from the date of purchase,
which are covered by the factory warranty, you can go back to the
point of purchase to replace it for a new one.
•
Only material or manufacturing defects are included in this warranty.