Specification And Materials Of Construction; Important; Ec Declaration Of Conformity - DeVilbiss AGMDPRO Serie Manual De Operación

Important - Read and follow all instructions and Safety Precautions before using
this equipment.
Specification & Materials of construction
Fluid inlet & fluid recirculation
Air inlet (Atom/Fan)
Cylinder/trigger
Maximum temperature in use
Spray Gun
Spray Gun + Intermediate Plate
Weights
Spray Gun + Intermediate Plate +
Machine adaptor
Gun body
Head
Needle
IMPORTANT: These Sprayguns are suitable for use with both water-based and solvent-based
coating materials. They are not designed for use with highly corrosive and/or abrasive materials
and if used with such materials it must be expected that the need for cleaning and/or replacement
of parts will be increased.
If there is any doubt regarding the suitability of a specific material, contact your DeVilbiss
Distributor or Finishing Brands UK direct.
NOTE: This gun is not to be used with halogenated hydrocarbon solvents or cleaning agents such
as 1,1,1,-Trichloroethane or methylene chloride. These solvents can react with the aluminium
components used in this gun. The reaction can become violent and lead to an equipment
explosion.

EC Declaration of Conformity

We, Finishing Brands UK Limited, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the
manufacturer of the Spray gun model AGMDPRO, declare, under our sole responsibility that the
equipment to which this document relates is in conformity with the following standards or other normative
documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the protection requirements
of Council Directive 98/37/EEC relating to Machinery Safety Directive, and;
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective Systems intended for
use in Potentially Explosive Atmospheres protection level II 2 G X T6.
Finishing Brands UK Limited reserves the right to modify equipment specification without prior notice.
© 2013 Finishing Brands UK Ltd.
Thread
1/8" BSP
1/8" BSP
1/8" BSP
104° F (40° C)
22.79 oz (646 g)
25.22 oz (715 g)
33.86 oz (960 g)
Materials of construction
Aluminium Anodised
Stainless steel 303
Acetal Needle Tip
D. Smith, General Manager
th
28 October 2013
3
Pressure
Max 15 Bar
Max 12 Bar
3.5 to 6 Bar