Additional Warnings; Symbols - Stiga CS 48 Li 14 Manual De Instrucciones

contact and enables better control of the
chain saw in unexpected situations.
• Only use replacement bars and chains
specified by the manufacturer. Incorrect
replacement bars and chains may cause
chain breakage and/or kickback.
• Follow the manufacturer's sharpening
and maintenance instructions for the
saw chain. Decreasing the depth gauge
height can lead to increased kickback.

ADDITIONAL WARNINGS

• It has been reported that vibrations from hand-
held tools may contribute to a condition called
Raynaud's Syndrome in certain individuals.
Symptoms may include tingling, numbness
and blanching of the fi ngers, usually
apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness,
diet, smoking and work practices are all
thought to contribute to the development of
these symptoms. It is presently unknown
what, if any, vibrations or extent of exposure
may contribute to the condition. There are
measures that can be taken by the operator
to possibly reduce the effects of vibration:
• Keep your body warm in cold weather.
When operating the unit wear gloves
to keep the hands and wrists warm.It is
reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
• After each period of operation, exercise
to increase blood circulation.
• Take frequent work breaks. Limit the amount
of exposure per day. If you experience
any of the symptoms of this condition,
immediately discontinue use and see
your physician about these symptoms.
• The recommended cutting capacity of this
chain saw is 153mm (6 in.) and smaller to
prolong the life of the tool and allow for safest
operation. Cutting logs with a diameter
larger than this will cause excess wear on
your tool. Logs with a maximum diameter
of 229mm (9in.) can be cut, but should
only be done so rarely and with caution.
• The integral spiked bumper is
designed to assist cutting. When
forced against the log while cutting it
provides a more stable pivot point.
• Any chainsaw is potentially lethal if used
inappropriately. It is strongly suggested
that you seek professional training
in the safety and use of this tool.
• Recommendations for first-time users
Before felling or delimbing for
the first time, make sure:
– you have been specifically trained
to use this type of equipment;
– you have carefully read the safety
regulations and user instructions
contained in this manual;
– you practise first on logs on the ground
or attached to trestles, in order to
get familiar with the machine and the
most suitable cutting techniques.
SAVE THESE INSTRUCTIONS. REFER TO
THEM FREQUENTLY AND USE THEM TO
INSTRUCT OTHERS WHO MAY USE THIS UNIT.
IF YOU LOAN SOMEONE THIS UNIT, LOAN
THEM THESE INSTRUCTIONS ALSO.

2. SYMBOLS

Some of the following symbols may be used
on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols
will allow you to operate the tool better and safer..
SYMBOL
V
W
Direct current - Type or
characteristic of
current
Precautions that involve
your safety
Read the operation
manual and follow all
warnings and safety instructions.
Wear eye and hearing
protection when
operating this product.
Do not expose to rain or
damp conditions.
Hold with both hands
Be aware of kicking back.
The following signal words and meanings
are intended to explain the levels of
risk associated with this product.
4
DESIGNATION/EXPLANATION
Voltage
Watt – Power