Electrical Connection - schmalz VS-VP1-W-D NPN K 3C-D Manual De Instrucciones

5 Electrical Connection
NOTE
Incorrect power supply
Destruction of the integrated electronics
4 Operate the product using a power supply unit with protected ex-
4 The system must incorporate safe electrical cut-off of the power
4 Do not connect or disconnect the connector under tension and/or
NOTE
Connect with the power turned on
Damage to the electronics and/or malfunction
4 Switch off the power supply before connecting cables!
The vacuum switch is supplied with a 4-wire connection cable with open cable ends.
Integrate the Vacuum/pressure switch into your application in accordance with the electri-
cal circuit diagram.
EN-US · 30.30.01.02016 · 00 · 04/19
tra-low voltage (PELV).
supply in compliance with EN60204.
when voltage is applied.
13 / 44