Evolution HULK PETROL COMPACT24HP Manual De Instrucciones página 15

Fig. 4
Fig. 5
• Remove the Oil Filler/Level Cap and wipe the
dipstick with a clean dry cloth.
• Pour in the required amount of oil. (approx 0.25L)
• Allow the oil to settle for 10+ seconds.
• View the oil level through the oil filler orifice. The
oil level should be very near the top of the threads
with oil just about to spill out from the crankcase
(the machine must be on a level horizontal surface).
• Insert the dipstick and screw the cap fully 'home'.
Unscrew the filler cap and withdraw the dipstick.
Visually check the
oil level on the dipstick.
• Adjust as necessary.
• When the level is correct tighten the Oil Filler/Level
Cap securely into the engine casing.
Note: Change the oil according to the Maintenance
Summary Chart (Refer also to MAINTENANCE –
Engine oil replacement)
Pre – operating checks
Note: Before each operation the machine should be
inspected to ensure that all safety features etc, are
working correctly.
• Check that all safety guards are in position and
undamaged.
• Hulk Electro – Check the integrity of the power
cable and plug. If the power cable or plug is
damaged in any way the cable and/or the plug
must be replaced by a competent technician with
identical replacement parts.
• Hulk Petrol - Check all fuel hoses, unions and filler
caps etc for signs of fluid leakage. Any leak detected
must be repaired before operations commence.
• Check the engine oil level and adjust as necessary.
• Check the fuel level and top up as necessary.
• Thoroughly inspect the rest of the machine for
any form of damage particularly to covers, guards,
rubber components etc.
Starting the Hulk Engine
• Turn the fuel tap lever to the 'On' position. (Fig. 4)
• Set the choke lever to the 'Choke On' position.
(Fig. 5)
www.evolutionpowertools.com 15