Specifications - JVC RX-5032VSL Manual De Instrucciones

Specifications

Amplifier
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/DIN):
Frequency Response (8 Ω):
Video
Video Input Sensitivity/Impedance:
Video Output Level/Impedance:
Signal-to-Noise Ratio:
33
Output Power: At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Surround channels:
(* Measured on AC 110 V, 127 V, 220 V, and 240 V)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Coaxial:
Optical:
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
TAPE/CDR, VCR:
CD, TAPE/CDR, VCR, TV SOUND, DVD:
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Tone Control: Bass (100 Hz):
Treble (10 kHz):
Composite video: DVD, VCR:
Composite video: VCR, MONITOR OUT:
Synchronization: Negative
45 dB
Designs & specifications are subject to change without notice.
100 W* per channel, min. RMS, driven into 8 Ω at 1 kHz with no
more than 0.9% total harmonic distortion. (IEC268-3/DIN)
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
DIGITAL 1 (DVD):
DIGITAL 2 (CD):
220 mV/47 kΩ
0.5 V (p-p)/75 Ω
–21 dBm to –15 dBm (660 nm ±30 nm)
220 mV
87 dB/67 dB
20 Hz to 20 kHz (±1 dB)
±10 dB
±10 dB
1 V (p-p)/75 Ω
1 V (p-p)/75 Ω