Figure 17 In Case Of Selecting 1 Server For Automatic Static Ip Assignment - FlexWATCH FW-3850 Manual De Usuario

FlexWATCH User Manual Part 2
Apply to all
Save & Close
Cancel
2.
After IP configuration, click "Connect" icon to access FlexWATCH. See live view of
FlexWATCH or specify system configuration on admin menu. Please refer to chapter
3.2 Live View and "User Manual for FlexWATCH" for more details of system
configuration and live view.
2.3.2.2. Automatic IP Assignment
FlexWATCH Installer can automatically find available IP address from the network in which
FlexWATCH Installer is being used. You can use the IP address searched by FlexWATCH Installer
or you may change the IP by yourself.
Notice) Any of the auto-assigned IP may cause a network collision and problem if it's already
assigned to another device in the same network. Auto-assigned IP is assigned based on C-Class or its
Subnet.
1.
Please run FlexWATCH Installer, and search to see available FlexWATCH servers on
the list. Then, please select the server from the list and click on Automatic IP Setup
button.
2.
In case of selecting 1 server from the list

Figure 17 In case of selecting 1 server for Automatic Static IP Assignment

M4028
Please use this button when you enter the same values for multiple
servers. Please click one of the listed servers and make changes
as you wish. The values of rest of FW servers will be changed
accordingly. However, server names will be in the format of "your
chosen server name"+ascending number. And IP address will be
also assigned automatically by adding 1.
Will save all the changes to FlexWATCH servers and close network
setting window. (All the adjusted settings will be stored in Flash
Memory)
Cancel the all the adjusted setting and close the network setting
window.
16 Seyeon Tech Co., Ltd