Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Take out all removable parts, wrap them well and
tape together so they don't shift and rattle during the
move. Refer to sections in Using your Refrigerator for
removal instructions.
7. Depending on the model, raise the front of the
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they don't scrape the
floor. See the DOOR ALIGNMENT section.
8. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back
and refer to the REFRIGERATION INSTALLATION
section for setup instructions.
ICEMAKER OPERATION
WARNING
Personal Injury Hazard
Avoid contact with the moving parts of the ejector
mechanism. DO NOT place fingers or hands on the
automatic icemaking mechanism while the refrigerator
is plugged in.
A newly-installed refrigerator may take
12 to 24 hours to begin making ice.
Power Switch
ON/OFF
Feeler Arm
The icemaker will produce 12 cubes per cycle,
approximately 140-150 cubes in a 24-hour period,
depending
on freezer compartment
room temperature, number of door openings and other
operating conditions.
If the refrigerator is used before the water connection is
made to the icemaker, set the power switch to OFF.
When the refrigerator has been connected to the water
supply, set the power switch to ON.
CARE AND CLEANING
The icemaker will fill with water when it cools to freezing.
A newly-installed refrigerator may take 12 to 24 hours to
begin making ice cubes.
Throw away the first few batches of ice to allow the
water line to clear.
Be sure nothing interferes with the sweep of the feeler
arm.
When the bin fills to the level of the feeler arm, the
icemaker will stop producing ice.
It is normal for several cubes to be stuck together .
If ice is not used frequently, old ice cubes will become
cloudy, taste stale, and shrink.
WHEN SHOULD YOU SET THE ICEMAKER
POWER SWITCH TO (OFF)
NORMAL SOUNDS YOU MAY HEAR
temperature,
20
When the water supply will be shut off for several
hours.
When the ice storage bin is removed for more than a
minute or two.
When the refrigerator will not be used for several
days.
The icemaker water valve will buzz as the icemaker
fills
with water. If the power switch is in the
position, it will buzz even if it has not yet been hooked
up to water. To stop the buzzing, move the power
switch to OFF position.
NOTE: Keeping the power switch in the ON position
before the water line is connected can damage the
icemaker.
You will hear the sound of cubes dropping into the bin
and water running in the pipes as the icemaker refills.
ON
Tabla de contenido
Solución de problemas
