Troubleshooting - Brother MPRINT MW-120 Manual Del Usuario

Paper sizes (print area)
Normal type
Label sheets
(four down)
Label sheets
(two down)

Troubleshooting

Symptoms & remedies
Symptom: The printer
cannot be turned on.
Symptom: Although the
print command was
issued, the printer
does not print.
Symptom: There is a
paper misfeed.
A7 size: 2.9" (74 mm) × 4.1" (105 mm)
(2.7" (69 mm) × 3.9" (100 mm))
2.9" (74 mm) × 1.0" (26.25 mm)
(2.7" (69 mm) × 0.8" (21.25 mm))
2.9" (74 mm) × 2.1" (52.5 mm)
(2.7" (69 mm) × 1.9" (47.5 mm))
Remedy: Press and hold the power button
for a short while. (→ Refer to page 5.)
Remedy: The built-in lithium ion battery
needs recharging. (→ Refer to page 3.)
With an IrDA connection:
Remedy: Make sure that there is no
obstacle between this printer and the
PDA, and check that they are within
7.9" (20 cm) of each other. (→ Refer
page 10.)
Remedy: Disconnect the USB cable. (→
Refer to page 10.)
Remedy: Disconnect the serial cable.
With a USB connection:
Remedy: Check that this printer is
securely connected to the computer
with the USB cable. (→ Refer to page
11.)
With a serial connection:
Remedy: Check that this printer is
securely connected to the computer
with the serial cable.
Remedy: Remove the paper. (→ Refer to
page 12.)
Appendix
17