Amplification; Operation Of One Or Two Pairs Of Ckl110/T Speaker Enclosures - Ecler CKL/T Serie Manual De Instrucciones

Together with the CKL/T enclosure you will find a 4-way SPEAKON® cable connector. Always respect
polarity.
Make sure to securely plug in the SPEAKON® connector, i.e. fully inserting it to the socket and rotating it
to the right until noticing the locking mechanism.

6. AMPLIFICATION

6.1. Operation of one or two pairs of CKL110/T speaker enclosures

Any amplifier capable of delivering an output power between 350W and 700W is perfectly suitable for
driving a pair of CKL/Ts. Eclers amplification lines include several power amplifier models which can
perfectly fulfil this task. In case of operating two speaker enclosures in parallel, the required output
power of the amplifier should lie between 700W and 1400W at 4.
This enclosure has been designed for the reproduction of voice signals mainly. If the enclosure is to be
installed in an acoustically deficient space (poor intelligibility, highly reverberant), it is recommended to
use an external active filter with a cut-off frequency lying between 140 and 170 Hz, keeping the high-
pass signal. In the Ecler product range, you can find some alternatives:
 FAP30L, two way stereo crossover with limiter.
 DP300, digital programmable three way stereo processor.
 UCM20 analog, and AMIC digital cards. Both for direct mount on the back panel of DPA/T series
amplifiers.
D P A /T S E R IE S P O W E R A M P L IF IE R W IT H
U C M 20 U N IV E R S A L C R O S S O V E R M O D U L E
CKL SERIES
LOUDSPEAKER
CABINET
STACK OUTPUT INPUT
1+ LIVE
1- GND
2+ N.C.
2- N.C.
mad e by ecler s.a. barcelona spain
Remember that the CKL110/T includes a passive filter which separates mid and high frequencies.
1+ LIVE
1- GND
2+ N.C.
2- N.C.
GND
MAINS INPUT
GND LINK
ON OFF
CKL SERIES
LOUDSPEAKER
CABINET
STACK OUTPUT INPUT
1+ LIVE
1- GND
2+ N.C.
2- N.C.
m ad e by ecler s.a. barcelona spain
UCM 20 OUTPUT
FREQ. Hz
FILTER HP FILTER HP CH1
R L 1
1
FLAT LP FLAT LP
INT. AMPLIFIER EXT. AMPLIFIER OUTPUT
CHANNEL 2 CHANNEL 1 (BRIDGE)
CH2
1
1
STEREO
STK OUTPUT INPUT BRIDGE INPUT STK OUTPUT
BRIDGED:
CH1, 2 2
JACK: TIP=HOT, RING=COLD XLR3: PIN2=HOT, PIN3=COLD
IN P U T
CKL SERIES
LOUDSPEAKER
CABINET
STACK OUTPUT INPUT
1+ LIVE
1- GND
2+ N.C.
2- N.C.
mad e by ecler s.a. barcelona sp ain
CKL SERIES
LOUDSPEAKER
CABINET
STACK OUTPUT INPUT
1+ LIVE
1- GND
2+ N.C.
2- N.C.
mad e b y ecler s.a. b arcelona spain
7