Norton Clipper CP512-300 Manual De Instrucciones página 7

Warning, instruction and notice icons used in the operating instructions and on the equipment:
Warning! Failure to comply with the instructions could cause accidents with potentially life-
threatening injuries.
Caution! Failure to comply with the instructions could result in damage to the equipment or other
material damage.
Carefully read the operating instructions. This applies before placing the equipment into
operation and before any cleaning, maintenance or assembly work.
Always wear the prescribed clothing.  Chap. 3.3, page 7
Always wear sturdy shoes with good grip.
Wear safety gloves. This applies to all work with or on the equipment.
Before starting the engine, put on hard hat, hearing protection, face shield and safety glasses.
Switch off the engine!
Smoking is prohibited anywhere near the power tool and in the location where it is refueled!
Keep the power tool and fuel canisters away from open flames.
Warning: Danger of poisoning!
Warning: Kickback!
Notes in chap. 7.2 as of page 27 must be observed under all circumstances!
Warning: Danger of fire from sparks.
Wear breathing protection equipment.
Never use toothed circular saw blades.
Never use a damaged cut-off wheel.
Only use cut-off wheels approved for a speed of ≥ 4,450 min
Vibrator dial for interim emptying of the air filter  Chap. 8.4, page 33
Noise level L
WA
®
iLube = Smart lubrication (separate lubrication, only for model CP512-300i and CP514-350i)
Fuel tank  Chap. 5.5, as of page 18
Oil tank (green cap, model CP512-300i and CP514-350i)  Chap. 5.5, as of page 18
Starting notes  Chap. 6, as of page 24
- The power tool generates exhaust gases.
- Gasoline vapors are toxic.
- Dangerous dust emissions when working.
= 110 dB(A)
Warning, instruction and notice icons
-1
[4,450 RPM].
ENGLISH 5