Tabla de contenido
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Safety InStructIonS
Notice For customers iF Your uNit is equipped With A poWer cord.
WArNiNG: this AppLiANce shALL Be coNNected to A mAiNs socKet
outLet With A protectiVe eArthiNG coNNectioN.
the cores in the mains lead are coloured in accordance with the following code:
GREEN and YELLOW - Earth
BLUE - Neutral
As colours of the cores in the mains lead of this appliance may not cor-
respond with the coloured markings identifying the terminals in your plug,
proceed as follows:
the core which is coloured green and yellow must be connected to the
•
terminal in the plug marked with the letter e, or with the earth symbol,
or coloured green, or green and yellow.
the core which is coloured blue must be connected to the terminal
•
marked N or coloured black.
the core which is coloured brown must be connected to the terminal
•
marked L or coloured red.
this equipment may require the use of a different line cord, attachment
plug, or both, depending on the available power source at installation.
if the attachment plug needs to be changed, refer servicing to qualified
service personnel who should refer to the table below. the green/yellow
wire shall be connected directly to the units chassis.
WIRE COLOR
CONDUCTOR
Normal
L
LIVE
BROWN
N
NEUTRAL
BLUE
E
EARTH GND
GREEN/YEL
WARNING: if the ground is defeated, certain fault conditions in the unit
or in the system to which it is connected can result in full line voltage
between chassis and earth ground. severe injury or death can then result if
the chassis and earth ground are touched simultaneously.
WARNING FOR YOUR PROTECTION
PLEASE READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
THE APPARATUS SHALL NOT bE ExPOSED
TO DRIPPING OR SPLASHING LIqUID AND
NO ObjECT FILLED WITHI LIqUID, SUCH AS
vASES, SHALL bE PLACED ON THE APPARA-
TUS.
CLEAN ONLY WITH A DRY CLOTH.
DO NOT bLOCK ANY OF THE vENTILATION
OPENINGS. INSTALL IN ACCORDANCE
WITH THE MANUFACTURER'S INSTRUC-
TIONS.
DO NOT INSTALL NEAR ANY HEAT SOURC-
ES SUCH AS RADIATORS, HEAT REGISTERS,
STOvES, OR OTHER APPARATUS (INCLUD-
ING AMPLIFIERS) THAT PRODUCE HEAT.
ONLY USE ATTACHMENTS/ACCESSORIES
SPECIFIED bY THE MANUFACTURER.
UNPLUG THIS APPARATUS DURING LIGHT-
NING STORMS OR WHEN UNUSED FOR
LONG PERIODS OF TIME.
Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or third prong
are provided for your safety. If the provided plug
BROWN - Live
does not fit your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Use only with the cart stand, tripod bracket, or
table specified by the manufacture, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Refer all servicing to to qualified service person-
nel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply
Alt
cord or plug is damaged, liquid has been spilled
BLACK
or objects have fallen into the apparatus, the
WHITE
apparatus has been exposed to rain or moisture,
GREEN
does not operate normally, or has been dropped.
POWER ON/OFF SWITCH: The Power switch
used in this piece of equipment DOES NOT
break the connection from the mains.
MAINS DISCONNECT: The plug shall remain
readily operable. For rack-mount or installation
where plug is not accessible, an all-pole mains
switch with a contact separation of at least 3
mm in each pole shall be incorporated into the
electrical installation of the rack or building.
FOR UNITS EqUIPPED WITH ExTERNALLY
ACCESSIbLE FUSE RECEPTACLE: Replace fuse
with same type and rating only.
MULTIPLE-INPUT vOLTAGE: This equipment
may require the use of a different line cord,
attachment plug, or both, depending on the avail-
able power source at installation. Connect this
equipment only to the power source indicated
on the equipment rear panel. To reduce the risk
of fire or electric shock, refer servicing to quali-
fied service personnel or equivalent.
Tabla de contenido
