Hkoenig KOL7812 Manual De Usuario página 11

INSTALLATION & ADJUSTMENT
1. Installation
Notes:
l Keep this mobile air-conditioner in upright position at least 2 hours before first installation.
l This air-conditioner may be moved indoor conveniently; keep the unit in upright position while
moving it. The air-conditioner shall be placed at flat surface.
l Do not install or operate this air-conditioner in bathroom or other wet environments.
1) Installation of exhaust hose assembly and its adapter.
A. Take out the exhaust hose and its connector and adapter, to remove the plastic bag.
B. Extend one end of exhaust hose, screw the end without slot of round connector onto it with
anticlockwise direction at least 3 laps.
C. Extend another end of exhaust hose, screw the adapter onto it with anticlockwise direction at
least 3 laps.
Note: Screw round connector and adapter into right position, at least 3 laps, to keep good
connection of exhaust hose assembly.
2) Installation of window seal-plate
A. Make the window half open, put the seal-plate into window, either in vertical or horizontal
position.
B. Extend seal plate parts and adjust it to the length of window, keep both ends to meet window
edge, fix it with screws then.
Note:
l Keep two ends of window seal-plate to meet the window edges well, to assure seal effect.
l Turn the screw in good position.
3) Installation of the unit
A. Move the unit with the exhaust hose assembly installed in front of window and keep the unit at