Disconnecting The »Cm-Bt2« From The Telephone - HumanTechnik cm-BT2 Instrucciones De Servicio

For some telephones, it might be necessary to make the connection manu-
ally once the headset has been registered.
For more information, refer to your telephone's operating manual. You only
have to register the »CM-BT2« on the telephone once. After that, the »CM-
BT2« will be recognized automatically.
The »CM-BT2« is connected to the telephone when the blue status indica-
tor lights up for 1 second every 5 seconds.
The »CM-BT2« will now appear in the menu of your telephone that displays
all the Bluetooth devices that are currently paired with the telephone.
Disconnecting the »CM-BT2« from the telephone
Perform one of the following steps to terminate the connection between
the »CM-BT2« and the telephone (e.g. when you want to connect another
Bluetooth device to the telephone):
• Switch the »CM-BT2« off.
• Terminate the connection to the »CM-BT2« in the telephone's
Bluetooth menu.
• Move the »CM-BT2« to a position more than 10 meters away from the
telephone.
Please note: You do not have to delete the »CM-BT2« from the telephone's
list of compatible devices to terminate the connection.
English 23