Mipu LUNA Cluster 2.book Seite 11 Freitag, 17. Mai 2013 3:18 15
If you hold the pump at too
Note:
great an angle, or if the pump topples
over, it will switch off automatically.
The pump has a 2-phase pumping
rhythm to simulate a baby's natural
sucking rhythm when breastfeeding.
The
phases
can
individually.
The sucking rhythm is rapid and
Phase 1:
stimulating during this phase to stimulate
the milk flow.
To switch from Phase 1 to Phase 2,
Phase 2:
press On/Off button 15 a second time.
During Phase 2, the pump sucks in a slow
and intensive rhythm ensuring maximum
milk flow. The combination of the 2 phases
ensures efficient expressing.
4. Adjust the suction strength using the
suction strength regulator 18 until the
optimum suction strength is attained.
If the suction strength is too weak,
turn the suction strength regulator 18
towards the "+" symbol.
If the suction is too strong, turn it
towards the "–" symbol.
Please note that the breast
Note:
pump has a higher suction strength in
Phase 2, so do not set suction strength
too high at first.
Caution!
only enough milk so that when
collected in the breast milk container,
it does not contact the bottom edge of
lip valve 5 .
5. Press On/Off button 15 a third time to
be
selected
complete the expressing operation
and switch off the pump.
Note:
expressing without switching off the
pump, simply place a finger between
your breast and the breast shield to
break the vacuum.
Note:
phase at any point by pressing On/Off
button 15 again.
6. After expressing, place the milk pump
in stand 11 otherwise the pump might
topple over.
7. If you have been operating the device
using mains adapter 19, take mains
adapter 19 out of the wall socket to
disconnect the device completely from
the power supply.
8. Unscrew breast milk container 6 from
connection ring 4 /the motor unit.
Ensure you keep the breast milk
container
9. Immediately after expressing, wash
the individual parts (see "5. Cleaning
and Sterilising" on page 8).
8.2 Feeding expressed milk
Screw teat 9 and screw ring 10 onto breast
milk container 6.
8.3 Storing expressed milk
1. To store the milk, secure the breast
milk container 6 with the sealing disc 7
provided, which should be screwed
11
To maintain function, express
If
you
want
to
interrupt
You can switch to the desired
in the process.
upright